FREE QUOTE

New HVAC Estimate

Heater Tune-Up

Schedule Maintenance

HVAC SERVICE

Service Agreements

Home  »  Heating MaintenanceOil Heating   »   Maintaining an Oil Heater with DIY Oil Furnace Tips and Checks
Oil Heater Maintenance - Tigerloop Replaced

Maintaining an Oil Heater with DIY Oil Furnace Tips and Checks

Winter may pose challenges, and a malfunctioning oil furnace can add to the struggle. The cost of repairs or replacement can be daunting, but there is hope. Simple furnace maintenance that costs little or nothing can prevent at least 25% of all heating service calls. So, before giving up, take a few easy steps to try and repair your furnace and get it back to working condition. Moreover, our Willow Grove oil furnace maintenance contractors are here to help. Remember, a little effort can go a long way in solving the problem..

Temperature Control – Maintaining Oil Heater Thermostat

To check your heater, verify the temperature setting and ensure it matches the room temperature. If it’s lower, try setting the thermostat five degrees higher than the room temperature to see if the furnace is operating properly.
“If you have a programmable thermostat, you can easily override the programmed settings by using the up/down control and then pressing the hold button. This will switch on the heater. If the furnace still does not start, check if the thermostat is set to “Heat” mode and the fan is set to “Auto” mode.”
Check if the thermostat has batteries and replace them if necessary. Also, check the thermostat wires for damages caused by remodeling. If you find any damages, splice the line back together and wrap it with electrical tape.
Lastly, check the date and time settings on the thermostat and make any necessary corrections. By following these steps, you can ensure that your furnace is working efficiently to keep you warm.

Access and Check Oil Furnace Air Filters

To ensure that your oil furnace runs smoothly, it is important to change your HVAC filters regularly. Dirty filters can cause dust and dirt to build up, restricting airflow and causing the heat exchanger to overheat, which can lead to issues with your furnace.

We suggest replacing your air filter every 3 months, ensuring that the arrow on the filter points along the airflow. If you have pets and small children, it is recommended to change filters monthly to ensure optimal air quality.

Do not neglect air filter maintenance as it can lead to costly and inconvenient service calls. Consider getting a maintenance agreement from EMCO Tech Heating and Cooling for worry-free maintenance. Check out their website to learn more.

Importance of Checking Furnaces’ Shutoff Switches and Breakers

It is essential to check the shutoff switches and breakers regularly to ensure the smooth running of your heating system. The emergency shut-off switch, which looks like a regular light switch, is located next to your oil heater. All properly installed furnaces must have a manual shut-off. Therefore, it is crucial to check the circuit breaker or fuse box and ensure that all the panels of your heating system are tightly closed. Additionally, there is a push-in safety switch located under the front cover that you must check to ensure it is secured, as it can trip the furnace if not correctly installed.

Chimney Exhaust Flue – Check for Blockages

Blocked chimney exhaust flues can cause significant problems and affect the performance of your heating system. Birds often build their nests in the chimney exhaust flue, which can lead to blockages. Therefore, it is essential to check the chimney exhaust flue regularly. Turn off your oil furnace heater and dismantle the exhaust duct to check for debris. Check the chimney cleanout as well. Regular chimney inspection is also recommended to ensure proper operation and safety.

Importance of Checking Oil Heating Burner Section

An oil burner inspection is a crucial maintenance task that should not be overlooked by homeowners. It involves a thorough examination of the oil burner system, including the oil tank, fuel lines, burner nozzle, and combustion chamber, among others. Regular oil burner inspection ensures that your heating system runs smoothly and efficiently, prevents hazardous situations like fire or carbon monoxide leaks, and extends the life of your equipment.

Hire a Local Contractor for Oil Heating Maintenance & Tune-Up Services

Regular maintenance of your oil burner is essential for keeping your home warm and comfortable during the cold winter months. Clean the condensate drain line and outdoor unit, and call furnace repair technicians or professional HVAC services like EMCO Tech Oil Furnace Maintenance Contractors in Willow Grove if you notice any issues. With their fast and affordable services, you can ensure that your heating system functions optimally throughout the winter months. Hiring a professional oil heating contractor for tune-up and maintenance services will save you money in the long run, as it prolongs the life of your heating system and ensures its efficiency.

Additionally , EMCO Tech heating contractors are trained to service gas and oil boilers, Oil Heating Tune-Up, as well as Air Duct Cleaning Services. Call us today 215-366-1001 or request service online!

You can find more oil furnace tips and other info about maintaining a oil heater on this page.

Related trends:

— 2 Comments —

  • Zachary Tomlinson Thanks for the suggestion to invest in furnace maintenance because this can keep your heating unit functional and free of issues. My friend is interested in owning one for his future home once he gets married. I should talk to him about finding a reputable HVAC company for this someday. Reply
    • EMCO Editor Thank you for your comment. I'm pleased to hear that you found my post on maintaining oil furnaces helpful. Regular maintenance is crucial for keeping your home warm and comfortable during the winter months. I strongly recommend hiring a professional oil heating contractor, such as EMCO Tech Oil Furnace Maintenance Contractors in Willow Grove, to ensure that your heating system functions optimally throughout the entire cold season. With our expertise, you can have the confidence that your heating system is in good hands. Thanks again for your comment! Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

HVAC Services and Indoor Air Quality Products Categorized:

Need HVAC Service?  Contact EMCO Tech Today

At EMCO Tech Heating and Cooling, we understand the importance of having a functional heating and cooling system, whether it's in your home or commercial space. Our team of technicians is well-versed in all residential and commercial manufacturers of HVAC equipment, and we can handle any repair, installation, or maintenance job efficiently and effectively. We take pride in delivering superior customer service, while also ensuring that we use state-of-the-art diagnostic equipment to diagnose HVAC problems quickly. Plus, we offer cost-effective repair and replacement solutions to meet your needs and budget. We are the best HVAC service in Montgomery, Bucks, and Philadelphia because we don't just fix the problem - we also educate our customers on how to prevent future HVAC issues. Our team is dedicated to keeping you comfortable year-round, and we guarantee your satisfaction. Get in touch with us today to schedule a service call or to receive a free estimate.